D-5440NS Technical Data Sheet
Fluorocarbon Dry Lubricant
(Mil-L-60326) (MU) Type II Amend I
Zero Ozone Depleting

DESCRIPTION Zip-Chem D-5440NS Fluorocarbon Dry Lubricant is a fluorocarbon telomer chemically similar to Teflon* PTFE-fluorocarbon resin. Due to its chemical inertness and ability to withstand temperatures from the cryogenic range up to 500° Fahrenheit (260° C.), this fluorocarbon finds many uses not offered by other materials.
APPLICATION Zip-Chem D-5440NS fluorocarbon in aerosol form is designed primarily for use as a dry film lubricant or mold release where the application is to a cold or warm surface (less than 300° F.). It is formulated to give the highest adhesion possible to the substrate and still give good release or lubricating properties.
FEATURES

  • Excellent anti-stick properties.
  • Effective release agent for epoxies, polyurethanes, etc.
  • Withstands temperatures up to 500° F. (260° C.) Continuously.
  • Will not run or stain
  • Excellent dry film lubricant for wood, plastic, rubber, paper and metal.
  • Non-conductive, chemically inert in use.
SPECIFICATIONS

Conforms To:

  • Mil-L-60326 (MU) Type II Amend I
    • .
  • DPM 1762 Type 7E
  • DPM-3494
  • DMS-1762 Ty 7E
PHYSICAL
PROPERTIES

Viscosity: 25-50 CPS
Density: 6.6 lbs/gal
Softening Point: 510° F. (265°>C.)
Melting Point: 572° F. (300° C.)
Toxicity: Avoid inhaling vapors at high temps.

Although Zip-Chem D-5440NS is capable of withstanding up to 500° F., the binding resin of the product will start to decompose at 240° F. This product may safely be used up to 500° F. Provided the vapors are not inhaled, and adequate ventilation is provided.

* Teflon is a Registered Trademark of E.I. Dupont Co.
PACKAGING Aerosol, quarts, gallons, 5 gallons, drums
Special packaging upon request

BACK TO AERO-LUBE PAGE