Calla 800 Military
Meets all requirements of Specifications Mil-C-87937C Type II (USAF) and is on the Qualified Product List for this specification. Qualification Reference is SFIT-95-001.
Calla 800 is highly concentrated and versatile water base cleaner and is an outstanding
general aircraft cleaner and exhaust stain remover. It is also excellent for cleaning wheel
wells and landing gear without solvent.
The following recommendations for the cleaning of aircraft, aircraft components and facilities have been compiled through many years of cleaning many types of aircraft
under widely varied conditions.
Tail sections, Wing Tips, Etc.: Mix 1 part Calla 800 with 3 to 20 parts water, depending on the amount of soil; apply by spray or mop; allow a few minutes for penetration before
mopping or brushing and rinsing thoroughly. For recovery of badly oxidized surfaces, be
1 to 3 mixture will give excellent results under most conditions. Future washing with more
dilute mixtures will maintain oxide free, shiny surfaces.
Landing Gear: Mix 1 part Calla 800 with 2 parts water, apply by spray/mop; allow a few minutes for penetration before scrubbing heavy deposits; flood rinse with water.
If solvent can be used, mix 1 part Calla 800 with 5 parts solvent. Agitate mixture briefly
with air to form emulsion. Spray or mop rnifiure over entire area; allow a few minutes for
penetration; scrub surfaces well; rinse with water.
Landing Gear & Wheel Wells
While the use of solvent is restricted, apply Calla 800 full strength and allow 20 to 30 minutes dwell time,
brush those areas subject to heavy grease build up. Rinse with high pressure hot water with the nozzle as cclse as possible to surface to take advantage of
the additional agitation of water pressure.
Dilute Calla 800 as amount of soil requires in open bucket or barrel. Saturate mop in solution and wring out excess. Mop the surface thoroughly covering a small area at a
time. Rinse with a clean, damp mop.
Item Number-->Package size
002026-->330 GAL TOTE
008108-->TANK / TRUCK
Special packaging upon request